#hw-three-3x
Channel Description: Hardware discussion about comma 3 and comma 3x
Pins will be showed in the same order in app when viewing Discord pins
If there is a certain pinned post that seems to be better shown first, please let me know. To enlarge screenshots, tap/click on the image..
12/19/2023
Message
"C3 uses ublox, C3X uses EG25-G"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1186858000368013333
07/04/2023
Message:
"flash.comma.ai allows you to flash AGNOS onto your comma device… See also... https://github.com/commaai/openpilot/wiki/Addendums-to-C3-C3X-Flashing"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1125906803180454071
09/15/2023
Message:
"Don't forget you can mount USB storage via the C3/C3x USB-C port."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1152263534361722931
09/09/2023
Message:
"If you're having boot troubles after installing a <#538741329799413760> , here are some resources for a reflash.
- https://github.com/commaai/openpilot/wiki/Addendums-to-C3-C3X-Flashing
- Thread: https://discord.com/channels/469524606043160576/1138960979384881212"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1150094229373194290
06/11/2023
Message:
"if you’re still in warranty, use comma.ai/support"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1117699641534840863
07/18/2023
Message:
"No, some forks do not include recent code changes to support newer batch of displays"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1130966114919272528
08/22/2021
Message:
"https://youtu.be/gNnRmEyVSVQ"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/879027476372803634
06/09/2023
Message:
"we tend to extend return windows when we're still figuring out if an issue is HW or SW"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1116788212338266266
06/18/2023
Message:
"C3 Factory Reset now requires you tap the screen at least 3x during the first appearance of the Comma logo."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1119919098688700517
05/13/2023
Message:
"comma support https://comma.ai/support/comma-three"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1107066601645277325
04/27/2023
Message:
"it's the soldering from the wire to the connector pcb"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1101233974170374225
08/10/2021
Message:
"Use sudo when necessary."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/874834161913958430
01/11/2023
Message:
"Personally, I use a super low-profile OBD-II splitter which brings the connection up to a secret hidden compartment where I also have a bluetooth diagnostic connection attached...
https://www.amazon.com/gp/product/B071HP9JFJ/
https://www.amazon.com/gp/product/B07JFRFJG6"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1062844268781260811
01/17/2023
Message:
"https://www.usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%20August%202019.pdf
3.8.1.3 Durability or Insertion/Extraction Cycles (EIA 364-09)
"The durability rating shall be 10,000 cycles minimum for the USB Type-C connector family.
The durability test shall be done at a rate of 500 ± 50 cycles per hour and no physical
damage to any part of the connector and cable assembly shall occur."
Math: If you plug or unplug your device 5.5x a day for 5 years, you'll hit just over 10,000 cycles."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1065062671378038804
01/17/2023
Message:
"that's not the real temperature. 75C is the min it will show. you can see the real temperatures with dump deviceState"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1065018880331874418
12/22/2022
Message:
"https://youtu.be/Y3Z4j466CsE"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1055592983573057546
12/11/2022
Message:
"For anyone wanting a baseline of a healthy Cross Country C3 (Rev I logic board PCB w/ unused micro SD slot) connected w/ USB-C to A (ie. 5V... didn't use my Comma Serial) to compare serial output against, I captured the output from my C3 via my Linux box running...
sudo screen -L /dev/ttyUSB* 115200
I ended grabbing another log starting from a reboot too, described here...
https://discord.com/channels/469524606043160576/871838269405556736/1051895311720796251"
No fastboot events recorded. Quitting fastboot.
Booting from slot (_a)
Loading Image Start : 6349 ms
Loading Image Done : 6349 ms
Total Image Read size : 4096 Bytes
Loading Image Start : 6349 ms
Loading Image Done : 6377 ms
Total Image Read size : 14782464 Bytes
Loading Image Start : 6379 ms
No dtbo partition is found, Skip dtbo
VB: DeviceInit: Device is unlocked! Skipping verification!
VB: LoadImageAndAuthForLE complete!
Exit key detection timer
UsbfnDwcTransfer: Ep 1, EpDir 1: USB cable not attached, cannot transfer data
UsbDeviceSend: Failed to submit data transfer: Not Ready
No Ffbm cookie found, ignore: Not Found
Memory Base Address: 0x80000000
Decompressing kernel image start: 6408 ms
Decompressing kernel image done: 6759 ms
Cmdline: console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xA84000 androidboot.hardware=qcom androidboot.console=ttyMSM0 video=DSI-1:1080x2160@60e mdss_mdp.panel=0:dsi:0:dsi_ss_ea8074_fhd_cmd_display ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_lo
BootLinux: failed to get dtbo image
Best match DTB tags 341/00000008/0x00000000/20001/20014/20115/20018/0/(offset)0x99597726/(size)0x0005B604
Using pmic info 0x20014/0x20115/0x20018/0x0 for device 0x20014/0x20115/0x20018/0x0
Memory Base Address: 0x80000000
RAM Partitions
Add Base: 0x0000000080000000 Available Length: 0x00000000FDFA0000
WARNING: Could not find mem-offline node.
ERROR: Could not get splash memory region node
kaslr-Seed is added to chosen node
Shutting Down UEFI Boot Services: 6915 ms
BDS: LogFs sync skipped, Unsupported
App Log Flush : 18 ms
Exit BS [ 6937] UEFI End
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.103+ (batman@workstation-adeeb) (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) ) #1 SMP PREEMPT Thu Nov 3 19:06:37 PDT 2022
[ 0.000000] Boot CPU: AArch64 Processor [517f803c]
[ 0.000000] Machine: Qualcomm Technologies, Inc. sda845 v2.1 TurboX-SOM_V01
[ 0.000000] earlycon: msm_geni_serial0 at MMIO 0x0000000000a84000 (options '')
[ 0.000000] bootconsole [msm_geni_serial0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fdc00000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fcc00000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7000000, size 92 MiB
[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6000000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000017b800000, size 36 MiB
[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node secure_sp_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000008ab00000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region@0x8ab00000, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008bf00000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node camera_region@0x8bf00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c400000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ips_fw_region@0x8c400000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c410000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@0x8c410000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c415000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node gpu_region@0x8c415000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c500000, size 26 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region@0x8c500000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008df00000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@0x8df00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e000000, size 120 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@0x8e000000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095800000, size 5 MiB
[ 0.000000] OF: reserved mem: initialized node video_region@0x95800000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000095d00000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_region@0x95d00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096500000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node mba_region@0x96500000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000096700000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node slpi_region@0x96700000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000097b00000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node pil_spss_region@0x97b00000, compatible id removed-dma-pool
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffeebdc3b000 s54424 r8192 d31592 u94208
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 957923
[ 0.000000] Kernel command line: rcupdate.rcu_expedited=1 console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xA84000 androidboot.hardware=qcom androidboot.console=ttyMSM0 video=DSI-1:1080x2160@60e mdss_mdp.panel=0:dsi:0:dsi_ss_ea8074_fhd_cmd_display ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 androidboot.selinux=permissive firmware_class.path=/lib/firmware/updates net.ifnames=0 dyndbg="" root=/dev/sda6 androidboot.bootdevice=1d84000.ufshc androidboot.serialno=a225f199 androidboot.baseband=sda msm_drm.dsi_display0=dsi_fhd_ea8074_1080_cmd_display: androidboot.slot_suffix=_a skip_initramfs rootwait ro init=/sbin/init
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 124880(95%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0xf1800000-0xf5800000] (64MB) mapped at [ffffffee31800000-ffffffee357fffff]
[ 0.000000] Memory: 3452428K/3892516K available (18300K kernel code, 2616K rwdata, 11624K rodata, 6912K init, 12297K bss, 235288K reserved, 204800K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8797a80000 - 0xffffff8798c60000 ( 18304 KB)
[ 0.000000] .rodata : 0xffffff8798c60000 - 0xffffff87997c0000 ( 11648 KB)
[ 0.000000] .init : 0xffffff87997c0000 - 0xffffff8799e80000 ( 6912 KB)
[ 0.000000] .data : 0xffffff8799e80000 - 0xffffff879a10e200 ( 2617 KB)
[ 0.000000] .bss : 0xffffff879a10e200 - 0xffffff879ad106a4 ( 12298 KB)
[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbfb7000000 - 0xffffffbfbaf7e800 ( 63 MB actual)
[ 0.000000] memory : 0xffffffedc0000000 - 0xffffffeebdfa0000 ( 4063 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000]
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000] ** **
[ 0.000000] ** This means that this is a DEBUG kernel and it is **
[ 0.000000] ** unsafe for production use. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your vendor! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] PDC SDM845 v2 initialized
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.008071] clocksource: Switched to clocksource arch_sys_counter
[ 0.015626] Console: colour dummy device 80x25
[ 0.036320] allocated 25165824 bytes of page_ext
[ 0.043621] Node 0, zone DMA: page owner found early allocated 512 pages
[ 0.056572] Node 0, zone Normal: page owner found early allocated 6681 pages
[ 0.063986] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.074500] pid_max: default: 32768 minimum: 301
[ 0.079264] Security Framework initialized
[ 0.083414] SELinux: Initializing.
[ 0.087061] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.093863] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.102071] ftrace: allocating 49783 entries in 195 pages
[ 0.205822] /cpus/cpu@0: Missing clock-frequency property
[ 0.211376] /cpus/cpu@100: Missing clock-frequency property
[ 0.217028] /cpus/cpu@200: Missing clock-frequency property
[ 0.222704] /cpus/cpu@300: Missing clock-frequency property
[ 0.228399] /cpus/cpu@400: Missing clock-frequency property
[ 0.234073] /cpus/cpu@500: Missing clock-frequency property
[ 0.239769] /cpus/cpu@600: Missing clock-frequency property
[ 0.245454] /cpus/cpu@700: Missing clock-frequency property
[ 0.251664] sched-energy: Sched-energy-costs installed from DT
[ 0.257567] ASID allocator initialised with 32768 entries
[ 0.281363] MSM Memory Dump base table set up
[ 0.285822] MSM Memory Dump apps data table set up
[ 0.291161] EFI services will not be available.
[ 0.313224] CPU1: Booted secondary processor [517f803c]
[ 0.325767] CPU2: Booted secondary processor [517f803c]
[ 0.338414] CPU3: Booted secondary processor [517f803c]
[ 0.351651] CPU4: Booted secondary processor [516f802d]
[ 0.364597] CPU5: Booted secondary processor [516f802d]
[ 0.377690] CPU6: Booted secondary processor [516f802d]
[ 0.391119] CPU7: Booted secondary processor [516f802d]
[ 0.391446] Brought up 8 CPUs
[ 0.431434] SMP: Total of 8 processors activated.
[ 0.436191] CPU features: detected feature: GIC system register CPU interface
[ 0.443402] CPU features: detected feature: Privileged Access Never
[ 0.449751] CPU features: detected feature: User Access Override
[ 0.455814] CPU features: detected feature: 32-bit EL0 Support
[ 0.461720] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.519506] CPU: All CPU(s) started at EL1
[ 0.523730] alternatives: patching kernel code
[ 0.531284] devtmpfs: initialized
[ 0.741416] DMI not present or invalid.
[ 0.745982] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.755965] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.768577] pinctrl core: initialized pinctrl subsystem
[ 0.775948] NET: Registered protocol family 16
[ 0.783051] schedtune: init normalization constants...
[ 0.788313] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 17
[ 0.794903] schedtune: CPU[0] min_pwr: 4 max_pwr: 160
[ 0.801510] schedtune: CPU[1] min_pwr: 4 max_pwr: 160
[ 0.808128] schedtune: CPU[2] min_pwr: 4 max_pwr: 160
[ 0.814717] schedtune: CPU[3] min_pwr: 4 max_pwr: 160
[ 0.821323] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 190
[ 0.827912] schedtune: CPU[4] min_pwr: 40 max_pwr: 60000
[ 0.834528] schedtune: CPU[5] min_pwr: 40 max_pwr: 60000
[ 0.841135] schedtune: CPU[6] min_pwr: 40 max_pwr: 60000
[ 0.847724] schedtune: CPU[7] min_pwr: 40 max_pwr: 60000
[ 0.854340] schedtune: SYSTEM min_pwr: 178 max_pwr: 240847
[ 0.861038] schedtune: using normalization constants mul: 383241808 sh1: 1 sh2: 17
[ 0.868710] schedtune: configured to support 5 boost groups
[ 0.876467] cpuidle: using governor menu
[ 0.881856] cpuidle: using governor qcom
[ 0.890124] vdso: 2 pages (1 code @ ffffff8798c67000, 1 data @ ffffff8799e84000)
[ 0.897601] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.907506] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.915406] ipa_pm_is_used:3408 IPA HW is not supported
[ 0.920963] exit: IPA_USB init success!
[ 0.928023] pstore: using zlib compression
[ 0.933359] console [pstore-1] enabled
[ 0.937669] pstore: Registered ramoops as persistent store backend
[ 0.943945] ramoops: attached 0x400000@0xb0000000, ecc: 0/0
[ 0.966537] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
[ 0.973618] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
[ 0.980667] irq: no irq domain found for /soc/qcom,mdss_mdp@ae00000 !
[ 0.993092] irq: no irq domain found for /soc/pinctrl@03400000 !
[ 1.006296] unable to find DT imem DLOAD mode node
[ 1.012437] unable to find DT imem EDLOAD mode node
[ 1.028436] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[ 1.053314] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0x8e000000
[ 1.062462] platform 17300000.qcom,lpass: assigned reserved memory node adsp_region@0x8c500000
[ 1.071784] platform 5c00000.qcom,ssc: assigned reserved memory node slpi_region@0x96700000
[ 1.083209] platform 188101c.qcom,spss: assigned reserved memory node pil_spss_region@0x97b00000
[ 1.093077] msm_watchdog 17980000.qcom,wdt: wdog absent resource not present
[ 1.100326] msm_watchdog 17980000.qcom,wdt: No need to allocate memory for scandumps
[ 1.110451] msm_watchdog 17980000.qcom,wdt: MSM Watchdog Initialized
[ 1.117251] platform 8300000.qcom,turing: assigned reserved memory node cdsp_region@0x95d00000
[ 1.127329] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
[ 1.136609] platform aae0000.qcom,venus: assigned reserved memory node video_region@0x95800000
[ 1.152245] <CORE> glink_mailbox_probe: unable to create log context for [spss:mailbox]
[ 1.182739] sps:sps is ready.
[ 1.191267] platform soc:qcom,ipa_fws: assigned reserved memory node ips_fw_region@0x8c400000
[ 1.205407] msm-dcc 10a2000.dcc_v2: DCC list passed 2
[ 1.211113] msm-dcc 10a2000.dcc_v2: All values written to enable
[ 1.222106] platform soc:mem_dump: assigned reserved memory node mem_dump_region
[ 1.243180] Minidump: size should be 4 byte aligned
[ 1.248156] Failed to add entry in Minidump table
[ 1.267391] pm8998_s9_level: supplied by pm8998_s6_level
[ 1.273485] pm8998_s9_level_ao: supplied by pm8998_s6_level_ao
[ 1.309812] pm8998_l24: supplied by pm8998_l12
[ 1.320513] pm8998_lvs1: Bringing 1uV into 1800000-1800000uV
[ 1.328149] pm8998_lvs2: Bringing 1uV into 1800000-1800000uV
[ 1.414595] sdm845-v2-pinctrl 3400000.pinctrl: invalid resource
[ 1.492818] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0x8c415000
[ 1.586438] clk: cam_cc_bps_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac6f000.qcom,bps
[ 1.595796] clk: cam_cc_bps_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac6f000.qcom,bps
[ 1.605198] clk: cam_cc_cci_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac4a000.qcom,cci
[ 1.614186] clk: cam_cc_cci_clk_src: set OPP pair(100000000 Hz: 257 uV) on ac4a000.qcom,cci
[ 1.623383] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac65000.qcom,csiphy
[ 1.633198] clk: cam_cc_csi0phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac65000.qcom,csiphy
[ 1.643388] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac66000.qcom,csiphy
[ 1.653214] clk: cam_cc_csi1phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac66000.qcom,csiphy
[ 1.663435] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac67000.qcom,csiphy
[ 1.673239] clk: cam_cc_csi2phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac67000.qcom,csiphy
[ 1.683481] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(19200000 Hz: 49 uV) on ac68000.qcom,csiphy
[ 1.693200] clk: cam_cc_csi3phytimer_clk_src: set OPP pair(269333333 Hz: 129 uV) on ac68000.qcom,csiphy
[ 1.703931] clk: cam_cc_icp_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac00000.qcom,a5
[ 1.713018] clk: cam_cc_icp_clk_src: set OPP pair(600000000 Hz: 193 uV) on ac00000.qcom,a5
[ 1.722292] clk: cam_cc_ife_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on acaf000.qcom,vfe0
[ 1.731941] clk: cam_cc_ife_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on acaf000.qcom,vfe0
[ 1.741504] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb3000.qcom,csid0
[ 1.751244] clk: cam_cc_ife_0_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acb3000.qcom,csid0
[ 1.761391] clk: cam_cc_ife_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on acb6000.qcom,vfe1
[ 1.771000] clk: cam_cc_ife_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on acb6000.qcom,vfe1
[ 1.780611] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acba000.qcom,csid1
[ 1.790344] clk: cam_cc_ife_1_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acba000.qcom,csid1
[ 1.800494] clk: cam_cc_ife_lite_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc4000.qcom,vfe-lite
[ 1.810727] clk: cam_cc_ife_lite_clk_src: set OPP pair(600000000 Hz: 257 uV) on acc4000.qcom,vfe-lite
[ 1.820974] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(19200000 Hz: 129 uV) on acc8000.qcom,csid-lite
[ 1.831344] clk: cam_cc_ife_lite_csid_clk_src: set OPP pair(538666667 Hz: 257 uV) on acc8000.qcom,csid-lite
[ 1.842291] clk: cam_cc_ipe_0_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac87000.qcom,ipe0
[ 1.852116] clk: cam_cc_ipe_0_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac87000.qcom,ipe0
[ 1.862003] clk: cam_cc_ipe_1_clk_src: set OPP pair(19200000 Hz: 129 uV) on ac91000.qcom,ipe1
[ 1.871800] clk: cam_cc_ipe_1_clk_src: set OPP pair(600000000 Hz: 257 uV) on ac91000.qcom,ipe1
[ 1.884197] cam_cc-sdm845 ad00000.qcom,camcc: Registered Camera CC clocks
[ 1.894026] qmp-aop-clk soc:qcom,aopclk: Registered clocks with AOP
[ 1.902944] clk-rpmh soc:qcom,rpmhclk: Registered RPMh clocks
[ 1.912952] disp_cc-sdm845 af00000.qcom,dispcc: Registered Display CC clocks
[ 1.946316] gcc-sdm845 100000.qcom,gcc: Registered GCC clocks
[ 1.956171] clk: gpu_cc_gmu_clk_src: set OPP pair(19200000 Hz: 49 uV) on 506a000.qcom,gmu
[ 1.964856] clk: gpu_cc_gmu_clk_src: set OPP pair(500000000 Hz: 129 uV) on 506a000.qcom,gmu
[ 1.973597] gpu_cc-sdm845 5090000.qcom,gpucc: Registered GPU CC clocks
[ 1.983448] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(180000000 Hz: 49 uV) on 5000000.qcom,kgsl-3d0
[ 1.994041] clk: gpu_cc_gx_gfx3d_clk_src: set OPP pair(710000000 Hz: 417 uV) on 5000000.qcom,kgsl-3d0
[ 2.003454] gfxcc-sdm845 5090000.qcom,gfxcc: Registered GFX CC clocks
[ 2.012978] video_cc-sdm845 ab00000.qcom,videocc: Registered Video CC clocks
[ 2.035073] KPI: Bootloader start count = 72646
[ 2.039687] KPI: Bootloader end count = 227598
[ 2.044183] KPI: Bootloader display count = 1778425872
[ 2.049409] KPI: Bootloader load kernel count = 922
[ 2.054339] KPI: Kernel MPM timestamp = 327355
[ 2.058850] KPI: Kernel MPM Clock frequency = 32768
[ 2.063807] socinfo_print: v0.15, id=341, ver=2.1, raw_id=142, raw_ver=2, hw_plat=8, hw_plat_ver=65536
[ 2.063807] accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=0 serial_number=3007546807 num_pmics=3 chip_family=0x4f raw_device_family=0x6 raw_device_number=0x0 nproduct_id=0x3f4 num_clusters=0x1 ncluster_array_offset=0xb0 num_defective_parts=0x6 ndefective_parts_array_offset=0xb4 nmodem_supported=0xff
[ 2.104026] Minidump: Enabled with max number of regions 200
[ 2.109790] msm_bus_fabric_rpmh_init_driver
[ 2.115377] msm_bus: Probe started[ 2.123494] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 2.141414] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 2.147748] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 2.154379] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 2.177679] msm_bus: DT Parsing complete[ 2.190488] msm_bus_fab_init_noc_ops: Invalid Bus type
msm_bus_fab_init_noc_ops: Invalid Bus type[ 2.211650] msm_bus_fab_init_noc_ops: Invalid Bus type
msm_bus_fab_init_noc_ops: Invalid Bus type[ 2.303891] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_rear_dvdd_en/camera_rear_dvdd_en_default, deferring probe
[ 2.332721] reg-fixed-voltage 2.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_dvdd_en/camera_dvdd_en_default, deferring probe
[ 2.357101] arm-smmu 5040000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property)
[ 2.365705] arm-smmu 5040000.arm,smmu-kgsl: stream matching with 5 register groups, mask 0x7
[ 2.374459] arm-smmu 5040000.arm,smmu-kgsl: found 8 context interrupt(s) but have 5 context banks. assuming 5 context interrupts.
[ 2.394027] register_client_adhoc:find path.src 139 dest 627[ 2.400804] register_client_adhoc:Client handle 1 apps_smmu
[ 2.418043] arm-smmu 15000000.apps-smmu: (IDR0.CTTW overridden by dma-coherent property)
[ 2.426437] arm-smmu 15000000.apps-smmu: stream matching with 76 register groups, mask 0x7fff
[ 2.435917] arm-smmu 15000000.apps-smmu: found 64 context interrupt(s) but have 45 context banks. assuming 45 context interrupts.
[ 2.449430] register_client_adhoc:find path.src 139 dest 627[ 2.456064] register_client_adhoc:Client handle 2 apps_smmu
register_client_adhoc:find path.src 139 dest 627[ 2.480706] register_client_adhoc:Client handle 3 apps_smmu
register_client_adhoc:find path.src 22 dest 773[ 2.504744] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
register_client_adhoc:find path.src 22 dest 773[ 2.529095] register_client_adhoc:Client handle 5 mnoc_hf_1_tbu
register_client_adhoc:find path.src 137 dest 772[ 2.553502] register_client_adhoc:Client handle 6 mnoc_sf_0_tbu
register_client_adhoc:find path.src 139 dest 627[ 2.578278] register_client_adhoc:Client handle 7 apps_smmu
register_client_adhoc:find path.src 139 dest 627[ 2.602840] register_client_adhoc:Client handle 8 apps_smmu
register_client_adhoc:find path.src 139 dest 627[ 2.627417] register_client_adhoc:Client handle 9 apps_smmu
[ 2.648540] iommu: Adding device ae00000.qcom,mdss_mdp to group 0
[ 2.654985] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se:qcom,iommu_qupv3_0_geni_se_cb to group 1
[ 2.664590] iommu: Adding device ac0000.qcom,qupv3_1_geni_se:qcom,iommu_qupv3_1_geni_se_cb to group 2
[ 2.674382] iommu: Adding device 1de0000.qcedev to group 3
[ 2.680209] iommu: Adding device 1de0000.qcrypto to group 4
[ 2.686105] iommu: Adding device 18800000.qcom,icnss to group 5
[ 2.692401] iommu: Adding device 800000.qcom,gpi-dma to group 6
[ 2.698656] iommu: Adding device a00000.qcom,gpi-dma to group 7
[ 2.704890] iommu: Adding device 88a7000.msm_tspp to group 8
[ 2.710945] iommu: Adding device soc:apps_iommu_test_device to group 8
[ 2.717760] iommu: Adding device soc:apps_iommu_coherent_test_device to group 8
[ 2.725545] iommu: Adding device soc:qcom,msm-audio-ion to group 9
[ 2.732109] iommu: Adding device a600000.ssusb to group 10
[ 2.737918] iommu: Adding device soc:usb_audio_qmi_dev to group 11
[ 2.744431] iommu: Adding device a800000.ssusb to group 12
[ 2.752076] vgaarb: loaded
[ 2.755344] SCSI subsystem initialized
[ 2.759591] usbcore: registered new interface driver usbfs
[ 2.765233] usbcore: registered new interface driver hub
[ 2.770886] usbcore: registered new device driver usb
[ 2.778311] soc:usb_nop_phy supply vcc not found, using dummy regulator
[ 2.786063] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
[ 2.801212] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from STAGE3 (Stage 3 reset)
[ 2.815215] input: qpnp_pon as /devices/virtual/input/input0
[ 2.822127] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
[ 2.832055] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
[ 2.846744] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
[ 2.861490] media: Linux media interface: v0.10
[ 2.866149] Linux video capture interface: v2.00
[ 2.917710] EDAC MC: Ver: 3.0.0
[ 2.923342] dmi: Firmware registration failed.
[ 2.931030] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
[ 2.940329] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0x8ab00000
[ 2.950656] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
[ 2.960274] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node secure_sp_region
[ 2.969796] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_display_region
[ 2.980619] ION heap system created
[ 2.984411] ION heap adsp created at 0x00000000fcc00000 with size 1000000
[ 2.991338] ION heap qsecom created at 0x000000008ab00000 with size 1400000
[ 2.998415] ION heap qsecom_ta created at 0x00000000f6000000 with size 1000000
[ 3.005730] ION heap spss created at 0x00000000f5800000 with size 800000
[ 3.012635] ION heap secure_display created at 0x00000000f7000000 with size 5c00000
[ 3.020417] ION heap secure_heap created
[ 3.026845] ipa ipa3_tz_unlock_reg:4876 Bad parameters
[ 3.032089] ipa ipa3_pre_init:5075 Failed to unlock memory region using TZ
[ 3.039481] register_client_adhoc:find path.src 90 dest 512[ 3.047548] register_client_adhoc:find path.src 90 dest 585
register_client_adhoc:find path.src 1 dest 676[ 3.072772] register_client_adhoc:find path.src 143 dest 777
register_client_adhoc:Client handle 10 ipa[ 3.095985] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 3.117093] ipa ipa3_uc_state_check:284 uC interface not initialized
[ 3.125290] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 13
[ 3.133010] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 14
[ 3.140863] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 15
[ 3.150209] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
[ 3.155633] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
[ 3.161072] PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
[ 3.172267] Advanced Linux Sound Architecture Driver Initialized.
[ 3.179914] Bluetooth: Core ver 2.22
[ 3.183584] NET: Registered protocol family 31
[ 3.188131] Bluetooth: HCI device and connection manager initialized
[ 3.194580] Bluetooth: HCI socket layer initialized
[ 3.199545] Bluetooth: L2CAP socket layer initialized
[ 3.204733] Bluetooth: SCO socket layer initialized
[ 3.210778] NetLabel: Initializing
[ 3.214236] NetLabel: domain hash size = 128
[ 3.218672] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.223783] NetLabel: unlabeled traffic allowed by default
[ 3.229719] pcie:pcie_init.
[ 3.238781] 1c00000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
[ 3.246983] 1c00000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
[ 3.255488] register_client_adhoc:find path.src 45 dest 512[ 3.263522] register_client_adhoc:Client handle 11 pcie0
[ 3.281619] msm_pcie_get_resources: PCIe: RC0 can't get iatu resource.
[ 3.288446] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
[ 3.295439] msm_pcie_probe: PCIe: RC0 could not get pinctrl power_on state
[ 3.302416] msm_pcie_probe: PCIe: RC0 could not get pinctrl sleep state
[ 3.309707] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[ 3.321970] msm_pcie_enable: PCIe RC0 PHY is ready!
[ 3.336966] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[ 3.452773] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[ 3.459509] msm_pcie_enable: PCIe RC0 link initialization failed
[ 3.465952] msm_pcie_enumerate: PCIe: failed to enable RC0.
[ 3.471641] msm_pcie_probe: PCIe: RC0 is not enabled during bootup; it will be enumerated upon client request.
[ 3.482981] 1c08000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
[ 3.491243] 1c08000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
[ 3.499702] register_client_adhoc:find path.src 100 dest 512[ 3.507557] register_client_adhoc:Client handle 12 pcie1
[ 3.525781] msm_pcie_get_resources: PCIe: RC1 can't get iatu resource.
[ 3.536575] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
[ 3.543603] msm_pcie_probe: PCIe: RC1 could not get pinctrl power_on state
[ 3.550601] msm_pcie_probe: PCIe: RC1 could not get pinctrl sleep state
[ 3.557683] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1.
[ 3.570615] msm_pcie_enable: PCIe RC1 PHY is ready!
[ 3.585596] msm_pcie_enable: PCIe: Release the reset of endpoint of RC1.
[ 3.629524] msm_pcie_enable: PCIe RC1 link initialized
[ 3.634816] OF: PCI: host bridge /soc/qcom,pcie@0x1c08000 ranges:
[ 3.641015] OF: PCI: No bus range found for /soc/qcom,pcie@0x1c08000, using [bus 00-ff]
[ 3.649403] OF: PCI: IO 0x40200000..0x402fffff -> 0x40200000
[ 3.655432] OF: PCI: MEM 0x40300000..0x5fffffff -> 0x40300000
[ 3.661862] pci-msm 1c08000.qcom,pcie: PCI host bridge to bus 0001:00
[ 3.668428] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 3.673994] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x40200000-0x402fffff])
[ 3.683674] pci_bus 0001:00: root bus resource [mem 0x40300000-0x5fffffff]
[ 3.692343] iommu: Adding device 0001:00:00.0 to group 16
[ 3.698037] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.708022] iommu: Adding device 0001:01:00.0 to group 16
[ 3.713924] pci 0001:00:00.0: BAR 8: assigned [mem 0x40300000-0x405fffff]
[ 3.720867] pci 0001:00:00.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 3.728733] pci 0001:00:00.0: BAR 0: assigned [mem 0x40800000-0x40800fff 64bit]
[ 3.736177] pci 0001:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 3.742377] pci 0001:01:00.0: BAR 0: assigned [mem 0x40300000-0x40303fff 64bit]
[ 3.749873] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 3.754918] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff]
[ 3.761120] pci 0001:00:00.0: bridge window [mem 0x40300000-0x405fffff]
[ 3.768005] pci 0001:00:00.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 3.776222] msm_pcie_probe: RC1 is enabled in bootup
[ 3.789694] spmi spmi-1: SPMI PMIC arbiter debug bus controller added
[ 3.797520] gpu_gx_gdsc: supplied by pm8005_s1_level
[ 3.806867] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu0
[ 3.817473] clk: add_opp: Set OPP pair (1766400000 Hz, 796000 uv) on cpu0
[ 3.824627] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu1
[ 3.835206] clk: add_opp: Set OPP pair (1766400000 Hz, 796000 uv) on cpu1
[ 3.842391] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu2
[ 3.852884] clk: add_opp: Set OPP pair (1766400000 Hz, 796000 uv) on cpu2
[ 3.860058] clk: add_opp: Set OPP pair (300000000 Hz, 584000 uv) on cpu3
[ 3.870482] clk: add_opp: Set OPP pair (1766400000 Hz, 796000 uv) on cpu3
[ 3.877638] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu4
[ 3.890023] clk: add_opp: Set OPP pair (2803200000 Hz, 1040000 uv) on cpu4
[ 3.897220] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu5
[ 3.909592] clk: add_opp: Set OPP pair (2803200000 Hz, 1040000 uv) on cpu5
[ 3.916803] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu6
[ 3.929172] clk: add_opp: Set OPP pair (2803200000 Hz, 1040000 uv) on cpu6
[ 3.936413] clk: add_opp: Set OPP pair (825600000 Hz, 600000 uv) on cpu7
[ 3.948716] clk: add_opp: Set OPP pair (2803200000 Hz, 1040000 uv) on cpu7
[ 3.958040] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on soc:qcom,l3-cpu0
[ 3.965890] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on soc:qcom,l3-cpu4
[ 3.973750] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on soc:qcom,l3-cdsp
[ 3.981607] clk: add_opp: Set OPP pair (300000000 Hz, 592000 uv) on 5000000.qcom,kgsl-3d0
[ 4.000976] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on soc:qcom,l3-cpu0
[ 4.008932] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on soc:qcom,l3-cpu4
[ 4.016850] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on soc:qcom,l3-cdsp
[ 4.024788] clk: add_opp: Set OPP pair (1478400000 Hz, 816000 uv) on 5000000.qcom,kgsl-3d0
[ 4.037987] cpufreq: driver osm-cpufreq up and running
[ 4.043233] clk: clk_cpu_osm_driver_probe: OSM CPUFreq driver inited
[ 4.049984] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_rear_dvdd_en/camera_rear_dvdd_en_default, deferring probe
[ 4.067757] reg-fixed-voltage 2.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_dvdd_en/camera_dvdd_en_default, deferring probe
[ 4.086212] sched-energy energy-costs: cpu=0 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 4.097670] CPU0: update cpu_capacity 381
[ 4.101761] sched-energy energy-costs: cpu=1 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 4.113204] CPU1: update cpu_capacity 381
[ 4.117274] sched-energy energy-costs: cpu=2 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 4.128716] CPU2: update cpu_capacity 381
[ 4.132784] sched-energy energy-costs: cpu=3 eff=1024 [freq=300000 cap=65 power_d0=12] -> [freq=1766400 cap=381 power_d0=160]
[ 4.144203] CPU3: update cpu_capacity 381
[ 4.148319] sched-energy energy-costs: cpu=4 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 4.160172] CPU4: update cpu_capacity 1024
[ 4.164338] sched-energy energy-costs: cpu=5 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 4.176216] CPU5: update cpu_capacity 1024
[ 4.180395] sched-energy energy-costs: cpu=6 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 4.192270] CPU6: update cpu_capacity 1024
[ 4.196436] sched-energy energy-costs: cpu=7 eff=1740 [freq=300000 cap=110 power_d0=189] -> [freq=2956800 cap=1024 power_d0=60000]
[ 4.208311] CPU7: update cpu_capacity 1024
[ 4.212559] sched-energy energy-costs: Sched-energy-costs capacity updated
[ 4.219731] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_rear_dvdd_en/camera_rear_dvdd_en_default, deferring probe
[ 4.237454] reg-fixed-voltage 2.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_dvdd_en/camera_dvdd_en_default, deferring probe
[ 4.256156] clocksource: Switched to clocksource arch_sys_counter
[ 4.415983] VFS: Disk quotas dquot_6.6.0
[ 4.420190] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.430175] debugcc-sdm845 soc:qcom,cc-debug@100000: Registered debug mux successfully
[ 4.442359] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 4.448501] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.456167] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.463852] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.471578] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.479259] mdss_pll ae94a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.487825] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks successfully[ 4.495798] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 4.514532] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.522218] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.529921] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.537581] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.545277] mdss_pll ae96a00.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 4.558122] dsi_pll_10nm_lock_status: DSI PLL(1) lock failed, status=0x00000000
[ 4.565824] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=1, clocks successfully[ 4.573799] mdss_pll_probe: MDSS pll label = MDSS DP PLL
[ 4.612922] NET: Registered protocol family 2
[ 4.618370] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 4.625794] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 4.632906] TCP: Hash tables configured (established 32768 bind 32768)
[ 4.639728] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 4.645851] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 4.652818] NET: Registered protocol family 1
[ 4.657608] reg-fixed-voltage 1.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_rear_dvdd_en/camera_rear_dvdd_en_default, deferring probe
[ 4.675295] reg-fixed-voltage 2.gpio-regulator: could not find pctldev for node /soc/qcom,spmi@c440000/qcom,pm8998@0/pinctrl@c000/camera_dvdd_en/camera_dvdd_en_default, deferring probe
[ 4.694452] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 4.711967] audit: initializing netlink subsys (disabled)
[ 4.717604] audit: type=2000 audit(4.699:1): initialized
[ 4.728722] Initialise system trusted keyrings
[ 4.733955] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 4.753743] Registering sdcardfs 0.1
[ 4.757839] fuse init (API version 7.26)
[ 4.763661] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 4.769929] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
[ 4.776183] pfk [pfk_init]: Driver initialized successfully
[ 4.788322] NET: Registered protocol family 38
[ 4.792835] Key type asymmetric registered
[ 4.796991] Asymmetric key parser 'x509' registered
[ 4.801967] io scheduler noop registered
[ 4.806287] io scheduler cfq registered (default)
[ 4.848135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.857892] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5b00: Registered qpnp_clkdiv_1 successfully
[ 4.868655] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5c00: Registered qpnp_clkdiv_2 successfully
[ 4.879414] qcom,qpnp-clkdiv c440000.qcom,spmi:qcom,pm8998@0:qcom,clkdiv@5d00: Registered qpnp_clkdiv_3 successfully
[ 4.947762] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
[ 4.956184] icnss: Platform driver probed successfully
[ 4.967582] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
[ 4.978056] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
[ 4.988447] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
[ 5.000382] register_client_adhoc:find path.src 125 dest 512[ 5.007435] register_client_adhoc:Client handle 13 scm_pas
[ 5.025783] minidump-id not found for adsp
[ 5.030617] minidump-id not found for slpi
[ 5.035151] minidump-id not found for spss
[ 5.039488] subsys-pil-tz 188101c.qcom,spss: for spss segments only will be dumped.
[ 5.048329] minidump-id not found for cdsp
[ 5.053403] register_client_adhoc:find path.src 63 dest 512[ 5.059946] register_client_adhoc:Client handle 14 pil-venus
[ 5.078349] minidump-id not found for venus
[ 5.082608] subsys-pil-tz aae0000.qcom,venus: for venus segments only will be dumped.
[ 5.091359] minidump-id not found for ipa_fws
[ 5.095785] subsys-pil-tz soc:qcom,ipa_fws: for ipa_fws segments only will be dumped.
[ 5.104882] minidump-id not found for a630_zap
[ 5.109427] subsys-pil-tz soc:qcom,kgsl-hyp: for a630_zap segments only will be dumped.
[ 5.120573] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
[ 5.126291] minidump-id not found for modem
[ 5.136216] input: qbt1000_key_input as /devices/virtual/input/input1
[ 5.152017] msm_geni_serial a84000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console1
[ 5.160598] a84000.qcom,qup_uart: ttyMSM0 at MMIO 0xa84000 (irq = 11, base_baud = 0) is a MSM
[ 5.182671] console [ttyMSM0] enabled
[ 5.182671] console [ttyMSM0] enabled
[ 5.190115] bootconsole [msm_geni_serial0] disabled
[ 5.190115] bootconsole [msm_geni_serial0] disabled
[ 5.202694] msm_geni_serial 88c000.qcom,qup_uart: Wakeup byte 0xfd
[ 5.209092] msm_geni_serial 88c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0
[ 5.218032] 88c000.qcom,qup_uart: ttyHS0 at MMIO 0x88c000 (irq = 12, base_baud = 0) is a MSM
[ 5.227888] msm_geni_serial_init: Driver initialized[ 5.233671] register_client_adhoc:find path.src 1 dest 618
register_client_adhoc:Client handle 15 msm-rng-noc[ 5.259709] random: crng init done
[ 5.289811] [drm] Initialized
[ 5.293243] register_client_adhoc:find path.src 20003 dest 20515[ 5.299605] register_client_adhoc:find path.src 20004 dest 20515
register_client_adhoc:Client handle 16 disp_rsc_mnoc[ 5.323472] register_client_adhoc:find path.src 20001 dest 20513
register_client_adhoc:Client handle 17 disp_rsc_llcc[ 5.347279] register_client_adhoc:find path.src 20000 dest 20512
register_client_adhoc:Client handle 18 disp_rsc_ebi[ 5.371277] [sde_rsc_hw:rsc_hw_init:679]: sde rsc init successfully done
[ 5.390743] [sde_rsc:sde_rsc_probe:1416]: sde rsc index:0 probed successfully
[ 5.399504] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-0
[ 5.407032] msm-dsi-phy:[dsi_phy_driver_probe] Probe successful for dsi-phy-1
[ 5.415995] AXI: get_pdata(): Error: Client name not found
[ 5.421603] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 5.431200] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-0
[ 5.438530] AXI: get_pdata(): Error: Client name not found
[ 5.444083] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[ 5.453677] dsi-ctrl:[dsi_ctrl_dev_probe] Probe successful for dsi-ctrl-1
[ 5.463178] msm-dsi-panel:[dsi_panel_parse_reset_sequence:1717] RESET SEQ LENGTH = 24
[ 5.471151] msm-dsi-panel:[dsi_panel_parse_misc_features:1766] dsi_panel_parse_misc_features: ulps feature enabled
[ 5.481604] msm-dsi-panel:[dsi_panel_parse_misc_features:1772] dsi_panel_parse_misc_features: ulps during suspend feature enabled[ 5.495749] msm-dsi-display:[dsi_display_get_boot_display] index = 0
[ 5.514837] msm-dsi-display:[dsi_display_get_boot_display] index = 1
[ 5.522232] register_client_adhoc:find path.src 1 dest 590[ 5.528612] register_client_adhoc:Client handle 19 mdss_reg
register_client_adhoc:find path.src 22 dest 512[ 5.552222] register_client_adhoc:find path.src 23 dest 512
register_client_adhoc:Client handle 20 mdss_sde[ 5.575897] [drm:sde_dbg_init:3445] evtlog_status: enable:3, panic:1, dump:2
[ 5.595722] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops sde_rsc_comp_ops)
[ 5.604359] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops sde_wb_comp_ops)
[ 5.613296] msm-dsi-panel:[dsi_panel_vreg_get:229] failed to get vddcore regulator
[ 5.621116] msm-dsi-panel:[dsi_panel_drv_init:3008] [ss fhd cmd dsi panel] failed to get panel regulators, rc=-517
[ 5.631797] msm_drm ae00000.qcom,mdss_mdp: failed to bind soc:qcom,dsi-display@0 (ops dsi_display_comp_ops): -517
[ 5.642201] [drm:msm_drm_bind] *ERROR* component_bind_all failed: -517
[ 5.648842] [drm:sde_power_resource_deinit:810]: cliend:dsi_core_client0-2 still registered with refcount:0
[ 5.658690] Invalid index Defaulting curr to 0[ 5.663337] Invalid index Defaulting curr to 0
[ 5.680888] msm_drm ae00000.qcom,mdss_mdp: master bind failed: -517
[ 5.693472] iommu: Adding device 506a000.qcom,gmu:gmu_user to group 17
[ 5.700691] iommu: Adding device 506a000.qcom,gmu:gmu_kernel to group 18
[ 5.710566] register_client_adhoc:find path.src 26 dest 512[ 5.716677] register_client_adhoc:Client handle 19 grp3d
register_client_adhoc:find path.src 26 dest 10036[ 5.739853] register_client_adhoc:Client handle 20 cnoc
query_client_usecase_all: query_start[ 5.761121] query_client_usecase_all: query_start
[ 5.780909] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 19
[ 5.788996] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 20
[ 5.910048] brd: module loaded
[ 5.923196] loop: module loaded
[ 5.927341] zram: Added device: zram0
[ 5.931267] lkdtm: No crash points registered, enable through debugfs
[ 5.941677] CHRDEV "qseecom" major number 233 goes below the dynamic allocation range
[ 5.950056] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1400000
[ 5.956545] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE[ 5.963350] QSEECOM: qseecom_probe: no-clock-support=0x1
[ 5.981409] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[ 5.988222] QSEECOM: qseecom_probe: secure app region addr=0x86d00000 size=0x2200000[ 6.005469] register_client_adhoc:find path.src 125 dest 512
register_client_adhoc:Client handle 21 qseecom-noc[ 6.029900] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 6.052016] register_client_adhoc:find path.src 125 dest 512[ 6.058950] register_client_adhoc:Client handle 22 qcedev-noc
[ 6.080033] qce 1de0000.qcedev: QTI Crypto 5.4.1 device found @0x1de0000
[ 6.086811] qce 1de0000.qcedev: CE device = 0x0 IO base, CE = ffffff8010120000 Consumer (IN) PIPE 6,
[ 6.086811] Producer (OUT) PIPE 7 IO base BAM = 0000000000000000
[ 6.086811] BAM IRQ 103 Engines Availability = 0x2011073
[ 6.108055] sps:BAM 0x0000000001dc4000 is registered.[ 6.113393] sps:BAM 0x0000000001dc4000 (va:0xffffff80105c0000) enabled: ver:0x27, number of pipes:16
[ 6.135833] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x00000000... (82 KB left)
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1051720088014815314
11/25/2022
Message:
"If your C3 shows static on the screen, it could be possessed by poltergeist. Reseating the display’s ribbon cable connection to the main logic board PCB may exorcise the demon(s)."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/1045854832189247549
04/22/2022
Message:
"It takes a long time to design, test, manufacture, etc. these kinds of things. When this started years ago, they chose the 845 SOM which has 802.11a/b/g/a/n/ac 2ⅹ2 MIMO&BT 5.0 with BLE connectivity.
https://www.thundercomm.com/product/d845-som/
Maybe the next device will have something else, but this has almost nothing to do with how good it'll drive your car (which should be the main focus)."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/967109974499143710
07/08/2022
Message:
"The main thing is to not rapidly power cycle it. If you run into a situation where it seems bricked, let the supercapacitor drain for ~20 minutes."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/995152149501718579
02/20/2022
Message:
"As a reminder…
C2 issues go in https://discord.com/channels/469524606043160576/524328375754424320
C3 issues go in https://discord.com/channels/469524606043160576/871838269405556736
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/945033470810390629
11/01/2021
Message:
"Insert a compatible SIM in the demonstrated orientation all the way to hear the click...
https://discord.com/channels/469524606043160576/819046761287909446/890072224982237194
See also...
https://youtu.be/t_XSGZyHjM4"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/904825228167892992
12/16/2021
Message:
"https://www.amazon.com/gp/product/B005RNEH5O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
this is the lube i used for the c3 mount. i had some laying around. im sure some KY might work too."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/921110886435930132
12/13/2021
Message:
"Parametric pitch comma three mount! Open F3D in Fusion360 -> Solid -> Modify -> Change Parameter -> pitch -> use a negative angle because reasons. Attached are 15deg and 7.5deg in 3MF filetype for the cool kids."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/920191342330654730
08/16/2021
Message:
"When reseating/reconnecting the USB-C cable to the OBD-C port, be sure to let the C3's supercapacitor fully drain. It generally takes ~20-30 seconds for the C3's blue LED in the back to stop illuminating."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/876872537538187335
11/15/2021
Message:
"comma three bounty: https://github.com/commaai/agnos-builder/issues/16"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/909935863872507915
11/05/2021
Message:
"See, https://github.com/commaai/agnos-builder. And see https://github.com/commaai/agnos-builder/pull/2/files for an example"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/906302179348992030
10/29/2021
Message:
"https://comma.ai/shop/products/comma-three-display"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/903860950686388244
09/24/2021
Message:
"From the video I cited…"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/891152213156704267
09/14/2021
Message:
"Great documentation from Jason, as always...
https://github.com/commaai/openpilot/issues/22115
Straightforward fix...
https://github.com/commaai/openpilot/commit/84d37141a8edb2281bc56fe6556c7164a2f692d2
ie. sudo rm -f /data/etc/NetworkManager/system-connections/*.nmmeta"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/887510497514123314
09/08/2021
Message:
"https://nerd.egan.gg/ntegan/gadget
for those that want to get technical and have their C3 show up as an external drive when plugged into a PC via its second USB-C port
above link is dead
this is i think the same script
https://discord.com/channels/469524606043160576/871838269405556736/1052970291720101989"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/885230168875102250
08/31/2021
Message:
"Anyway, feel free to verify I’m not crazy, and use your old C2v1 ABS 3D printed mounts upside down for C3 🤯"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/882293589370077206
08/26/2021
Message:
"yes, see selfdrive/hardware/tici/agnos.py"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/880516452677980281
08/21/2021
Message:
"I just suspect some vehicles may have weaker batteries and it could cause a brown out and random reboot. Having the vehicle on can help ensure it's getting full 12 volts. From my experience It will have a lot of random reboots without any warning if you have improper voltage."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/878610406950727742
08/19/2021
Message:
"You can also try a factory reset...
"either through the uninstall button in the UI or tapping on the comma while it boots"
https://discord.com/channels/469524606043160576/871838269405556736/874881151389548565"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/877905005351424040
08/19/2021
Message:
"If you're stuck on a solid Comma, see my advice for that... [disconnect / power drain for a minute... sometimes need ~20 minutes] https://discord.com/channels/469524606043160576/871838269405556736/876872300484513842"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/877898426107461693
08/17/2021
Message:
"I recommend waiting for the sound of the fan ramp-up, before disconnecting power when powering off."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/877203182919512095
08/16/2021
Message:
"For the sake of documentation, some example cmds. regarding the C3 system partitions/slots in flash memory (commands often require sudo to work)...
abctl --boot_slot [Check your boot slot while in AGNOS.]
abctl --set_active 0 [Set slot to A while in AGNOS.]
fastboot --set-active=a [Set to slot A from bootloader, as seen in https://github.com/commaai/agnos/blob/master/flash.sh]
While poking around, I found this might be fun to run too (haven't tried it yet) to get a lot of info...
fastboot getvar all"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/876951977794347040
08/10/2021
Message:
"see the readme https://github.com/commaai/openpilot/blob/master/tools/ssh/README.md"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/874741986765176912
08/07/2021
Message:
"After listening to a sort of request from @Spektor65 in #comma-connect-prime, I decided to try installing a DLNA service on my C3, and it worked! I actually already had plenty of experience from this on my RPi4, so it was pretty straightforward, considering I also had the requisite C3 knowledge... https://youtu.be/oZ6ZGumCxC8"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/873770004288503829
08/07/2021
Message:
"All cameras have the same image sensor, each has a different lens on top of it"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/873696069253480539
08/05/2021
Message:
"i think C3 is a little bit more now power wise, but less than C2 at launch. will come down over time"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/873006761026674718
08/05/2021
Message:
"Comma Serial for C3...
https://youtu.be/AXwVPjt1TYI
https://github.com/commaai/openpilot/tree/master/tools/serial
Instead of running connect.sh, you may have better luck with running one of these commands manually…
Linux…
sudo screen /dev/ttyUSB* 115200
MacOS…
sudo screen /dev/tty.usbserial-* 115200
Simplified serial access…
https://youtu.be/H5GqNE2mKvs
[Note: Comma Serial isn’t required for serial access.]
Update: Native USB serial is not implemented on C3X...
https://github.com/commaai/panda/pull/1151#issue-1445564152
https://github.com/commaai/panda/blob/master/tests/som_debug.sh is the helper for that."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/873052144499044442
08/04/2021
Message:
"a huawei mate 10 pro screen will replace the screen :slight_smile: though the ones around on ebay have very varying quality and are not calibrated -- geohot (adding here to pin)"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/872647535993421835
08/03/2021
Message:
"https://github.com/commaai/openpilot/wiki/Comma3"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/872232908935549019
08/02/2021
Message:
"This 6.6’ cable is what I used with my “tici” before they provided their official cable. It was cool since I could take it off the windshield, play with it, stash it, etc. while keeping it connected…
https://www.amazon.com/dp/B089TBCS4K
What are you wanting to extend? The screen? Very, very bad move. Extremely sensitive."
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/871995763503271987
08/02/2021
Message:
"Like @Hubblesphere demonstrates, definitely consider using the included bag to store the C3. One could probably also use it to clean the lenses. Since my flight was cancelled, my video will have to kick things up a notch with something cool I have planned… https://youtu.be/rwQSKQ-vD2g"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/871959110025883688
08/02/2021
Message:
"C3 production - No more secrets… https://youtu.be/xxThZpdtZ14"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/871955359143694386
08/02/2021
Message:
"agnos repo is up! https://github.com/commaai/agnos"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/871893637817069628
08/02/2021
Message:
"https://youtu.be/qTaPD0l_8PM"
Link to Chat:
https://discord.com/channels/469524606043160576/871838269405556736/871852490872729742
Updated over 1 year ago